신소재공학과

Research Highlight

(Professor Jeung Ku Kang from the Graduate School of EEWS)
(Professor Jeung Ku Kang from the Graduate School of EEWS)

A KAIST research team made it one step closer to realizing safe energy storage with high energy density, high power density, and a longer cycle life. This hybrid storage alternative shows power density 100 times faster than conventional batteries, allowing it to be charged within a few seconds. Hence, it is suitable for small portable electronic devices. 

Conventional electrochemical energy storage systems, including lithium-ion batteries (LIBs), have a high voltage range and energy density, but are subject to safety issues raised by flammable organic electrolytes, which are used to ensure the beneficial properties. Additionally, they suffer from slow electrochemical reaction rates, which lead to a poor charging rate and low power density with a capacity that fades quickly, resulting in a short cycle life. 

On the other hand, capacitors based on aqueous electrolytes are receiving a great deal of attention because they are considered to be safe and environmentally friendly alternatives. However, aqueous electrolytes lag behind energy storage systems based on organic electrolytes in terms of energy density due to their limited voltage range and low capacitance. 

Hence, developing aqueous energy storage with high energy density and a long cycle life in addition to the high power density that enables fast charging is the most challenging task for advancing next-generation electrochemical energy storage devices. 

Here, Professor Jeung Ku Kang from the Graduate School of Energy, Environment, Water and Sustainability and his team developed an aqueous hybrid capacitor (AHC) that boasts high energy density, high power, and excellent cycle stability by synthesizing two types of porous metal oxide nanoclusters on graphene to create positive and negative electrodes for AHCs. 

The porous metal oxide nanoparticles are composed of nanoclusters as small as two to three nanometers and have mesopores that are smaller than five nanometers. In these porous structures, ions can be rapidly transferred to the material surfaces and a large number of ions can be stored inside the metal oxide particles very quickly due to their small particle size and large surface area.
 
The team applied porous manganese oxide on graphene for positive electrodes and porous iron oxide on graphene for negative electrodes to design an aqueous hybrid capacitor that can operate at an extended voltage range of 2V. 

Professor Kang said, “This newly developed AHC with high capacity and power density driven from porous metal oxide electrodes will contribute to commercializing a new type of energy storage system. This technology allows ultra-fast charging within several seconds, making it suitable as a power source for mobile devices or electric vehicles where solar energy is directly stored as electricity.”

This research, co-led by Professor Hyung Mo Jeong from Kangwon National University, was published in Advanced Functional Materials on August 15, 2018. 

Figure 1. Image that shows properties of porous metal oxide nanoparticles formed on graphene in the aqueous hybrid capacitor 
Figure 1. Image that shows porous metal oxide nanoparticles formed on graphene in the AHC 
No. Subject Author Date Views
Notice Highly Uniform and Low Hysteresis Pressure Sensor to Increase Practical Applicability ADMINI 2019.08.20 95
Notice High-Performance Sodium Ion Batteries Using Copper Sulfide ADMINI 2019.07.15 330
Notice Real-Time Analysis of MOF Adsorption Behavior ADMINI 2019.06.21 465
Notice Unravelling Inherent Electrocatalysis to Improve the Performance of Hydrogen Fuel Cells ADMINI 2019.03.28 513
Notice KAIST Top 10 Research Achievements of 2018 - Prof. Byong-Guk Park ADMINI 2019.02.01 1005
Notice Stretchable Multi-functional Fiber for Energy Harvesting and Strain Sensing ADMINI 2019.02.01 1001
Notice Fabrication of Shape-conformable Batteries Based on 3D-printing Technology ADMINI 2019.01.04 1143
51 Low-power, Flexible Memristor Circuit for Mobile and Wearable Devices ADMINI 2018.06.26 641
50 Spray Coated Tactile Sensor on a 3-D Surface for Robotic Skin ADMINI 2018.10.04 652
49 Flexible Piezoelectric Acoustic Sensors for Speaker Recognition ADMINI 2018.10.04 663
48 A High-Performance and Cost Effective Hydrogen Sensor ADMINI 2018.08.03 726
47 New Material for Generating Energy-Efficient Spin Currents ADMINI 2018.06.26 740
46 Levitating 2D Semiconductor for Better Performance ADMINI 2018.08.29 741
45 Mussel-Inspired Defect Engineering Enhances the Mechanical Strength of Graphene Fibers file ADMINI 2018.11.06 745
44 Flexible Drug Delivery Microdevice to Advance Precision Medicine ADMINI 2018.08.14 784
43 A New Efficient Oxide Coating Technology to Improve Fuel Cells ADMINI 2018.08.03 903
» KAIST Introduces Faster and More Powerful Aqueous Hybrid Capacitor file ADMINI 2018.11.13 907
41 Capillary Forces at Work for Lithium-Sulfur Batteries ADMINI 2018.06.26 972
40 New Anisotropic Conductive Film for Ultra-Fine Pitch Assembly Applications file ADMINI 2018.11.30 1041
39 Crystal size of organic semiconductors can be controlled using inorganic polymer micropillar-based solution shearing system file ADMINI 2018.11.06 1114